Smart Com Downloads
Upgrade Information

Please ensure that you have the latest versions of the Remote Diagnostic Web Server software and Diagnostic Receiver firmware as shown below:
  • Remote Diagnostic Web Server Software: Version 3.3.5
  • Diagnostic Receiver Firmware: Version 0.56
Should your Diagnostic Receiver require a firmware upgrade, please contact your distributor or us at info@varismine.com to arrange.

Determining Web Server Version
  1. Open the Remote Diagnostic Web Server.
  2. Click the "About" link (top right-hand corner of page).
  3. The following page will be displayed. This page shows both the Web Server software and DRX firmware versions.

(Click on image to enlarge)

Please note that the DRX and Web Server must be configured for proper communications to determine the DRX firmware version from the Web Server interface.

Determining DRX Firmware Version
  1. Open a web browser and type in the following: http://xxx.xxx.xxx.xxx/status.cgi. You must substitute the IP address of your DRX.
  2. The DRX firmware version will be listed under "General" information.
 
 
All contents copyright ©1999-2008 Varis Mine Technology Ltd.